广告主网上赚钱网站
行业新闻

当前位置:网站首页 > 新闻中心 > 行业新闻

  • 全自动热熔焊机的主要功能
  • 本站编辑:杭州先创热熔设备厂发布日期:2019-08-01 12:09 浏览次数:
全自动热熔焊机控制箱连有一个压力传感器和温度探头,可控制和调节加热板温度,也能控制焊接过程中预热阶段、吸热阶段、转换阶段、焊接阶段、冷却阶段等5个阶段的时间参数。工作时允许各阶段设置不同的压力及维持时间并记录,每个工作循环可自动记录并重复操作。一组新的焊接参数被选定,如果实际参数超差,将会出现报警提示。
 
The control box of fully automatic hot melt welding machine is connected with a pressure sensor and a temperature probe, which can control and adjust the temperature of heating plate. It can also control the time parameters of five stages in the welding process: preheating stage, endothermic stage, conversion stage, welding stage and cooling stage. Different pressure and maintenance time are allowed to be set and recorded in each stage. Each working cycle can be automatically recorded and operated repeatedly. A new set of welding parameters is selected. If the actual parameters are out of tolerance, an alarm will appear.
 
 
全自动热熔焊机一般具有以下功能:
 
Fully automatic hot melt welding machine generally has the following functions:
 
 
 
1、可以实现一致、可靠、可重复的操作;
 
1. It can achieve consistent, reliable and repeatable operation.
 
 
 
2、系统将控制监视并记录焊接过程中各阶段的主要参数,以判断每一焊口的状况;
 
2. The system will control, monitor and record the main parameters of each stage in the welding process to judge the condition of each welding joint.
 
 
 
3、焊机有数据检索存储装置和数据下载接口,能存贮和下载焊接数据;
 
3. The welding machine has data retrieval storage device and data download interface, which can store and download welding data.
 
 
 
4、铣削管道端面后,能够自动检查管道是否夹装牢固;
 
4. After milling the end face of the pipeline, it can automatically check whether the pipeline is clamped firmly or not.
 
 
 
5、自动测量拖动压力以及自动补偿拖动力;
 
5. Automatic measurement of drag pressure and automatic compensation of drag power;
 
 
 
6、根据选定参数自动监控热板温度,只有热板温度在设定的工作温度范围内时,焊机才能进行焊接;
 
6. Hot plate temperature can be automatically monitored according to the selected parameters. Only when the hot plate temperature is within the set working temperature range, the welding machine can be welded.
 
 
 
7、热板放入待焊两管材端面之后的所有阶段(加压、卷边、降压力降至拖动压力、吸热压力和时间、切换:机架打开/热板抽出/机架闭合、加压、保压、冷却)自动进行;
 
7. All stages (pressure, edge rolling, pressure drop to drag pressure, endothermic pressure and time, switching: rack opening/hot plate extraction/rack closing, pressurization, holding pressure and cooling) are automatically carried out after the hot plate is put into the end face of the two pipes to be welded.
 
 
 
8、微处理器采用闭环控制系统。
 
8. Microprocessor adopts closed-loop control system.

浙公网安备 33011002012312号

分享到:QQ空间新浪微博腾讯微博人人网微信